Types of Door Locks for Patio Doors in Aylesbury
A sliding patio door in aylesbury is a fantastic way to bring more light to your home. They are also simple to maintain and are secure from burglars.
A customer contacted us to discuss a new lock being installed on their front door. After discussing a range of choices, the customer decided to have a Yale Night latch installed with a new set keys.
Sash Locks
Sash locks, one of the most well-known types of mortice locks, operate using a combination latches as well as deadbolts. These locks are installed within the material of the door and are operated with keys to unlock or lock them. lock replacement aylesbury are an excellent option for back doors and front doors as they are extremely secure. Sash locks come in a variety of sizes that can be adjusted to any door thickness. They can also be installed on UPVC and hardwood doors.
There are many different kinds of sash locks available however the most well-known are the five lever sash lock and the three lever sash lock. The five-lever mortice lock is one of most secure choices and is in line with British Standards. It also has face plates and strikers that can be finished to match your door knobs or handles. The three-lever lock may not be as secure, but it still provides enough security for domestic use. It is simple to modify since it has smaller levers. It can also be installed for any door in the house.
The rim profile sashlock is another kind of sashlock. They are similar to sash lock, but they are different in that they do not fit inside the door. They attach to the surface and can be locked from both sides. They are suitable for interior doors that require privacy for privacy, like bedrooms and bathrooms.
A Sash lock is an excellent method to protect your home from intruders and keep your children safe. These locks work by preventing the sash from opening too much and ensuring that your children aren't able to escape from the window. They come in a range of sizes, from 3 inches to 5 inches and are a great addition to any window restoration project.
Installing sash window locks is easy and is attainable by anyone who likes D.I.Y. To begin, you'll require a pencil and ruler to mark the center point at which you want to put the lock. Once you have marked the spot, you will need to remove any old screws that hold the sash in place. After removing the screws, you must clean any debris or paint that might remain. Install the new fastener.
Mortice Locks
A mortise lock is a relatively large mechanism that fits into the interior of the door. They are commonly found in older buildings, as well as contemporary residential construction. You can still find mortise-style locks in hardware stores. It's a very secure and sturdy option, and is ideal for securing doors in high traffic areas such as schools or hospitals.
It's important to note that you aren't able to use a mortise lock using the standard door handle or knob because the bolt inserted into the door will only retract after the key is used. The bolt won't be able to move unless the knobs are turned. Therefore, it's crucial that you choose the knob and handle that fit into the lock case perfectly. Check out the diagram of your lock for any questions.
Mortice locks are typically made of durable materials that can withstand a great deal of wear and tear. They are extremely tough to break even under extreme pressure. They are a good option for areas with high traffic, like schools and hospitals, where they will be exposed to a lot of abuse.
Like rim locks, mortise deadlocks are available in different styles and security levels. There are three-lever mortice locks which are typically used for doors inside, like bedrooms or porches that are inside. They are not as secure as five-lever mortice locks because they are equipped with less levers.
If you're considering fitting a mortice lock on an exterior door, it's important to check that the one you purchase is British Standard approved. This will ensure your door is safe and stop intrusions into your home and taking valuables.
A mortise lock operates by locking into a pocket that is cut into the inside of the door frame. This pocket is called a 'mortise' and the lock is held in place by an 'lock case' fixed to the door frame with screws or nails. A hard collar is often attached to the outside of the lock cylinder, so that it can't be removed with the help of a pipe wrench.
Cylinder locks
Cylinder locks can be installed on uPVC wood, composite or timber doors. The locks comprise two parts - the lock, which is activated by the door latch or dead bolt, and the cylinder that controls it. The design permits both components to be replaced separately in the event of need. This can be useful if one of the parts isn't working properly or if you wish to upgrade to a more security cylinder.
The lock cylinder is equipped with series of pins in it. It is the part of the lock that receives keys. When a valid key is put in and the notches on the key push the pins up to different levels so that they can rotate to unlock the door. If you use a faulty key the notches won't align, and the majority of the pins remain in their normal position.
There are a variety of cylinder locks, from basic pin tumblers to high-security models that are resistant to a variety of lock picking methods. The more pins in a cylinder lock, the harder it is to pick them. A typical cylinder lock will have six pins, whereas higher security models could contain up to 13 pins. These extra pins can be referred to as "security pins". Security pins are available in a variety of forms, including spools with a narrow machined waist that resembles the cotton spool. They could also be serrated pins, which have one or more narrow grooves.
A cylinder lock can be installed more easily than a mortise as the door frame does not need to be drilled. However, it's a good idea to get your door frame measured and fitted to ensure that the lock is properly positioned. If your door isn't square you'll have to choose an offset cylinder.
Cylinder locks offer a superior level of security and are less expensive than smart locks. They are a great choice for homes that don't require as much security or for those who want to secure their home quickly and easily. They are especially efficient if your door has a hole that is pre-drilled for the lock.
Mullion Locks
A mullion is the center part of a double doorway that divides it into two sections, allowing one side to be used as an opening in one. It can be fixed or removed. Mullions can be made from metal, wood or plastic and are often used in conjunction together with mortise locks and rim exit devices. They improve the security of double doors and offer more space for exits than vertical rod devices. They are also ideal for hurricane and fire rated doors.
During construction, a mullion is likely to be welded to the top of the frame and then secured to the ground. However certain mullions are designed to be removed, making them a great choice for commercial applications where the position of the door can change frequently. For instance when a business owner plans to build an employee entrance on the back of their building, they can simply take the mullion off to allow deliveries and larger furniture through the door.
Conventional mullions require the removal of screws or bolts from fittings that are inset into the floor and top of the door frame. This is usually lengthy and labor intensive process that requires two people. Over time, repeated removals could cause the fittings and mullions loosen. Furthermore, if the mullion is not in place, carts, gurneys and large machines aren't able get through the doorway.
A keyed-removable door mullion has been designed to solve this issue. It allows the removal of a mullion effortlessly and quickly from the top bracket by using the rim cylinder. This is a great option when a large, unobstructed opening in the door is required. The PDQ 9300 series removable mullions are designed to be used with Rim Exit Devices 6300/6400 series of doors that are in pairs. The top bracket may also be lifted to allow the bottom fitting 20 to be permanently fixed to the floor 14 to raise the upwardly extending protrusions. The latch is released and the mullion can be temporarily removed. Once the mullion is installed, the latch is automatically engaged by the rim-cylinder and the locking mechanism is activated.